241.8 bhp & 210 ft lb @ Surrey Rolling Road

[Paul@1320]

We acheived this with the following mods

17% pulley Alta V2 pulley £283 fitted
Camshaft £350 fitted
GRS IC £440 fitted
Janspeed manifold £632 fitted
380cc JCW Injectors £290 fitted
Stock 02 grey coated Supercharger Free
Stock map Free
Stock Air box Free
Stock dirty air filter Free
Stock Cooper S cat back system Free
Stock Coil Free
Stock leads Free

Phrases for today are;

Its not how much you spend but how well you spend it

[sef]

Nice one Paul... Great results...

[Revolution Mini Works]

can we convert this to us bhp impaired types?

[Paul@1320]

208whp 175 ft lb

5.2 sec 30mph-70mph in 3rd gear

[GT4 Baz]

Nice one Paul!

Some great value for money mods right there, no wonder yours is going well, must be 200kg lighter than mine too!

There you go guys, if you want a blinking quick cooper S for reasonable money, thats what you need to do! I would also add a scangauge so you can keep an eye on things when hooning around, just to be on the safe side

Looking forward to get the cars together at the Autodrome now!

[GRSmotorsport]

Now thats value for money

[roland2003]

I thought you had a flowed head on your car aswell . If not why not?
Best Regards Roland GTT

[Revolution Mini Works]

Quote: Originally Posted by roland2003 (original)

I thought you had a flowed head on your car aswell . If not why not?
Best Regards Roland GTT

of course it does, the engine comes fully built as a race engine that is street legal

these are WHP numbers

[Paul@1320]

Quote: Originally Posted by roland2003 (original)

I thought you had a flowed head on your car aswell . If not why not?
Best Regards Roland GTT

We are always testing new ideas Roland and proving / disproving theories, there is so much hype and people spending money where they dont need to.

The Improvent at the moment from stock stands at 40+ horsepower , I wouldn't sell this as a 240 or even a 230 kit as there defintley seems to be vehicles which even in standard form make a max of 15 horsepower difference.

I forgot to add to the first post that it is an 02 gery coated supercharger as well

[Damo]

Oooooo all I need is a Janspeed Manifold and Cam then

[Paul@1320]

It does also depend how strong your engine is to begin with or as it is now

[roland2003]

Not bad guys, but still 32bhp short of our 'tuners own car' figure of 273bhp (240whp) also done on a Mini shootout day. If you had used the higher spec GTT intercooler and GTT Manifold I reckon you may have got 250bhp.
Proven reliability and longevity are of equal importance, we like to include alot input in this area with all our conversions. Still was a good day out by all accounts. Matter of interest what were JCW 200 and JCW210's putting out on the day (if there were any)
Best regards Roland GTT

[Paul@1320]

Maybe your own car 273bhp stage 2 head stock injectors with the GTT modified stock manifold is a better combonation than the results that we saw of your GTT customers engine as at SRR they were not near your awsome figures.

Send a GTT Intercooler and ex manifold up and we'll fit them and go back down to SRR dyno again.

On the tuner car / engine front this is an engine which had covered 47,000 in someone else's car and we've had just added the bits nothing special no nothing trick.

You're right on the realibility front I'd hate to be late dropping the kids off at school.

[roland2003]

Theres 2 or 3 guys with almost your setup. (ie Janspeed, GRs, and Alta 17%) but no cam making a lot less power than you. Why is that? The cam you say is 'same grind as Shrick' and I know that wont make '20bhp odd 'difference. Something doesnt add up . Yes the engine was someone elses once. But its in your own demo car .
Who with a GTT260 conversion went to the RR? Because thats what spec my car was. I know everyone thats had a GTT260 fitted & setup by us.
Why would you not have 'at the very least' a secondhand JCW head on your car. I mean you're breakers, so your going to pick the best bits out the pile of parts for your own car even if you dont want to pay for aftermarket gasflowing. You guys drag race,..... your going to leave out nothing .
Also what fuel did you use? Maybe Sunoco GT (109 octane high oxygen)
I thonk I can see why you wouldnt offer those 4 or 5 parts as a 241bhp conversion.

[GT4 Baz]

Out of interest Roland, what does the GTT260 package cost?

Is it the same price as what 1320 has suggested?

Also, why do you always seem to put other tuners down?

I don't even own a mini yet but I have been looking at this forum for a while now to see what to look out for on second hand cars and all you seem to do is snipe at any other tuner that dares suggest their own mods. Are you worried about competition?

As you rightly say (and are proud of) the devleopment work you have done on the mini is great, surely you don't need to put others down to help sell you kits? You already have many happy customers (as do Lohen and 1320) so why make assumptions that 1320 have some how "cheated" (high flow heads, high octane race fuel) to fudge the figures?

It just makes you look bitter and desparate and not appealing at all to a possible future customer.