GT Tuning& Janspeed Sports Cat&Manifold SPECIAL Mini2 PRICE £349+ vat See Post 6

[roland2003]

Hi Guys ,there is a brand new GTT sports cat& manifold in production as we speak,
which incorporates some new ideas and very high spec.I will put up the spec & why we are
doing it,tomorrow. If Rakey or anyone is interested in organising it we are more than happy to offer it on Group Buy for Mini 2 forum members, BTW there are no systems
available from us (for a while) but the GTT manifold/ cat fits AFAIK with all systems .
Best Regards Roland Gt Tuning

MINI 2 LAUNCH PRICE £399+vat ! (£95 off) SEE POST # 6
Also Janspeed S/Steel Sports Cat/Manifold £349+vat (£90 off)

[supercoopers]

Where's the info Roland?1 Huh, huh?

Henry

[roland2003]

Ok in brief we are going to offer 2 manifold/ cats. The first will based to compete with
the 'current crop ',and also a second higher spec item . This is the one I shall give some details of here;-
WELDS:- TIG Welded throughout. This is a much higher quality weld than MIG which is normally used. It is a smaller, neater weld with true penetration making it much stronger & less prone to cracking. It also takes alot more time to do.
PRIMARYS & FLANGE PLATE We use a 1.530" OD tube with 1.2mm wall,this is lighter
than more commonly used 1.5mm wall. The profile on the flange where it mates to the head,has been taken out to 1-1.5mm inside the gasket port profile all round, and are individually hand fettled/flowed. This blends exactly to the profile of our stage 2 CNC milled cylinder head exhaust ports,yet will step up in size, if used on stock size ports. This works very well as a type of 'anti reversal ratchet' anyway.
SECONDARY PIPE This is 2.5" dia with a 1.2mm wall,in preference to 2.25 " diameter
& 1.5mm wall;giving better flow capacity& lower weight.
CAT This is a brand new 120 cpsi design which flows much better ,(it has bigger holes in it)
yet does not suffer such a reduced life span of many sports cats, which can result
in lights on the dash and fault code P0420 for example.
REMOVABLE CAT The cat section will be flanged at each end to allow it to be quickly
detached without any removal or disturbance to either the manifold or the exhaust system.
Reasons for wanting to do this include:- to quickly fit a GTT de cat pipe in place of the Cat for trackdays. And perhaps more important to most,is to be able to easily and much more
cheaply, replace a worn out or broken Cat ,without requiring replacement of the entire manifold aswell.
Sports Cats on Minis can 'go' at around ,30K miles .
TBF there is no wonder cure for this hence the importance of this feature.
We can also offer optional mirror polish all over for show cars.
Best Regards Roland GT Tuning

[discodan]

any price or pics yet Roland?

[roland2003]

Hi Discoden, sorry no pics available yet. The only one completed is a prototype version
thats now on our demo car. THe construction is superb. I shall try and finalise prices this week for both this manifold /cat and also the cooking version.
Regards Roland Gt Tuning

[roland2003]

OK Here are some unrepeatable launch prices for BOTH stainless steel Sports Manifold & Cat.These prices are exclusive to Mini 2 users and valid until end of Feb. No minimum order,No deposit req'd,All major credit/debit cards accepted.
P&P UK mainland only £12 +vat.

GTT( Janspeed) Sports cat/manifold 'level 1' £349+ vat ! (RRP £499inc vat saves £90)
GTT Sports cat/manifold 'level 2' £399+ vat ! (saves £95)
Level 2 Features all TIG welding & seperate quick remove new 120CPSI Cat.+ More -see above post.

Delivery on 'Level 1' - approx 7days
Delivery on 'Level 2' -approx 21 days.

We can also fit either of the above at £75+vat. We also have the new GTT Exhaust
Re-Route Pipe for the Cooper S . Will post up later.

TO ORDER Tel 01258 455545 or e mail info@gtt.uk.com

Best Regards Roland Gt Tuning

[obehave]

That's $637 and $748 respectively in USD.
That's $766 and $902 respectively in Canadian
That's $891 and $990 respectively in AUD.

[LordNikon]

Interested in the stage II roland, will have to check the bank next week before ordering.

May want the Idler pulleys and stuff doing at the same time, is this possible in a day ??

Cheers

[roland2003]

Hi LB ,
No problem Cat/Manifold plus idler pulleys etc can be completed in a day.
Regards Roland GT Tuning

[roland2003]

Here is the new GTT 'Exhaust Re-Route Pipe' for the Cooper S std exhaust.
(It deletes one silencer)
I will add some info & price later.
Regards Roland GT Tuning

[obehave]

Quote: Originally Posted by roland2003

Here is the new GTT 'Exhaust Re-Route Pipe' for the Cooper S std exhaust.
(It deletes one silencer)
I will add some info & price later.
Regards Roland GT Tuning

Basically this makes a One Ball exhaust?

[roland2003]

Hi Obe, thats what you would call it,over here a oneball is a funny furry creature that lives on Wimbledon common. Usually called Orenoko or Uncle Bulgaria ,not a cool thing to have in your car!
Regards Roland
(ps search google womble)

[obehave]

Quote: Originally Posted by roland2003

Hi Obe, thats what you would call it,over here a oneball is a funny furry creature that lives on Wimbledon common. Usually called Orenoko or Uncle Bulgaria ,not a cool thing to have in your car!
Regards Roland
(ps search google womble)

Might make an attractive air filter

[Baker]

I'm interested in the Exhaust re-route pipe. I don't have enough money at the min to allow the purchase of a new cat/mainfold/exhaust system, but this should make my exhaust sound a bit nicer (but will it increase performance?)

Definatly want more info

[LordNikon]

Quote: Originally Posted by Baker

I'm interested in the Exhaust re-route pipe. I don't have enough money at the min to allow the purchase of a new cat/mainfold/exhaust system, but this should make my exhaust sound a bit nicer (but will it increase performance?)

Definatly want more info

I can see it easily freeing up some necessary gee'gee's, would make it sound alot nicer too IMO.