MINI2

roland2003 · Nov 5th, 2005, 01:11 PM

Hi Guys,we have just signed up to M2 again as sponsor after a short break. There are a couple of new products now available,the first of which is the new handbrake grip. CNC machined from solid aluminium , also includes a solid bronze larger release button with a milled angled scollop for your thumb. There are 2 versions; one in bright chrome & one in satin chrome. To achieve a realy nice finish with depth (something you wont get on chromed plastic) we first plate the alloy with copper,a more time consuming & expensive process but worth it. The grip is a little larger than stock too, we felt the original a bit puny. The 'O' rings shown can be easily fitted or removed ,so is up to you if you want to fit them. Price is £49+vat and we have them in stock now! - SEE PICS
Best Regards Roland GT Tuning

roland2003 · Nov 5th, 2005, 01:21 PM

Had to reduce the file size to get the pics up which unfortunatly dont do the product justice. There will be higher resolution pics on the website in the next week ,so check it out. In the meantime anyone that wishs to order and finds it anything less than stunning build ,finish and good enough to eat, can have full refund no problem if not 100% delighted.
Regards Roland

roland2003 · Nov 7th, 2005, 01:27 PM

Hopefully this pic is a bit better.

scouser · Nov 7th, 2005, 01:32 PM

Do you handle overseas orders i.e. Canada?

Perm · Nov 7th, 2005, 02:41 PM

Roland,
How difficult would the handbrake be to fit ?

Perm

roland2003 · Nov 8th, 2005, 10:38 AM

Hi yes we can send to Canada no problem
Fitting is easy; unclip the end of the stock grip then squeeze in the sides at the base of the gaiter to release the whole thing. Re attach GTT grip to gaiter using cable tie (same as stock.)
GTT button mounts over stock button;- use silicon sealant, refit gaiter/grip assembly,finally tighten the single retaining grub screw on the underside of the grip to hold it firmly on the handbrake lever. Job done.
Regards Roland GTT

Perm · Nov 8th, 2005, 11:12 AM

Roland,
Just to be clear. Is this just for the handbrake grip or the hand brake brip and leather rear cover also ?

Thanks
Perm

roland2003 · Nov 8th, 2005, 11:42 AM

Perm, no its just the grip & release button. Its just that you need to remove the gaiter to fit it.
Regards Roland

stapler · Nov 8th, 2005, 09:34 PM

looks nice

Cooper54 · Nov 9th, 2005, 05:23 AM

Have you got any pics of the satin part as I am interested in getting one to complement my satin Whalen shift machine..

roland2003 · Nov 9th, 2005, 08:52 AM

That last pic 'on the car' is satin finish with 'O' rings removed.
Regards Roland Gt Tuning

Nov 5th, 2005, 01:11 PM	#1
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 07:36 AM Posts: 2,700 Offline	New Posh Mini (GTuning) Handbrake Grip ! Hi Guys,we have just signed up to M2 again as sponsor after a short break. There are a couple of new products now available,the first of which is the new handbrake grip. CNC machined from solid aluminium , also includes a solid bronze larger release button with a milled angled scollop for your thumb. There are 2 versions; one in bright chrome & one in satin chrome. To achieve a realy nice finish with depth (something you wont get on chromed plastic) we first plate the alloy with copper,a more time consuming & expensive process but worth it. The grip is a little larger than stock too, we felt the original a bit puny. The 'O' rings shown can be easily fitted or removed ,so is up to you if you want to fit them. Price is £49+vat and we have them in stock now! - SEE PICS Best Regards Roland GT Tuning Attached Thumbnails www.gttuning.com

Nov 5th, 2005, 01:21 PM	#2 (permalink)
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 07:36 AM Posts: 2,700 Offline	Had to reduce the file size to get the pics up which unfortunatly dont do the product justice. There will be higher resolution pics on the website in the next week ,so check it out. In the meantime anyone that wishs to order and finds it anything less than stunning build ,finish and good enough to eat, can have full refund no problem if not 100% delighted. Regards Roland www.gttuning.com

Nov 7th, 2005, 01:27 PM	#3 (permalink)
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 07:36 AM Posts: 2,700 Offline	Hopefully this pic is a bit better. Attached Thumbnails www.gttuning.com

Nov 8th, 2005, 10:38 AM	#6 (permalink)
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 07:36 AM Posts: 2,700 Offline	Hi yes we can send to Canada no problem Fitting is easy; unclip the end of the stock grip then squeeze in the sides at the base of the gaiter to release the whole thing. Re attach GTT grip to gaiter using cable tie (same as stock.) GTT button mounts over stock button;- use silicon sealant, refit gaiter/grip assembly,finally tighten the single retaining grub screw on the underside of the grip to hold it firmly on the handbrake lever. Job done. Regards Roland GTT www.gttuning.com

Nov 8th, 2005, 11:42 AM	#8 (permalink)
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 07:36 AM Posts: 2,700 Offline	Perm, no its just the grip & release button. Its just that you need to remove the gaiter to fit it. Regards Roland www.gttuning.com

MINI2

Fuel for your MINI obsession

Performance Parts - Turbo Conversions

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Nov 7th, 2005, 01:32 PM	#4 (permalink)
scouser Evertonguy Join Date: Oct 2005 Location: Ottawa Ontario Local Time: 02:36 AM Posts: 136 Offline	Do you handle overseas orders i.e. Canada?

Nov 7th, 2005, 02:41 PM	#5 (permalink)
Perm MINI2 Senior Join Date: Jul 2003 Location: Nottinghamshire Local Time: 07:36 AM Posts: 466 Offline	Roland, How difficult would the handbrake be to fit ? Perm

Nov 8th, 2005, 11:12 AM	#7 (permalink)
Perm MINI2 Senior Join Date: Jul 2003 Location: Nottinghamshire Local Time: 07:36 AM Posts: 466 Offline	Roland, Just to be clear. Is this just for the handbrake grip or the hand brake brip and leather rear cover also ? Thanks Perm

Nov 8th, 2005, 09:34 PM	#9 (permalink)
stapler MINI2 Newbie Join Date: Feb 2005 Local Time: 07:36 AM Posts: 18 Offline	looks nice 05 cooper

Nov 9th, 2005, 05:23 AM	#10 (permalink)
Cooper54 Lightweight Join Date: Sep 2004 Location: Essex Local Time: 07:36 AM Posts: 420 Offline	Have you got any pics of the satin part as I am interested in getting one to complement my satin Whalen shift machine..

Nov 9th, 2005, 08:52 AM	#11 (permalink)
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 07:36 AM Posts: 2,700 Offline	That last pic 'on the car' is satin finish with 'O' rings removed. Regards Roland Gt Tuning www.gttuning.com

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Handbrake Grip	m3evodakar	Interior & Ice	0	Sep 2nd, 2006 04:26 PM
Handbrake Grip	MarkW19	For Sale	9	Jul 2nd, 2006 09:18 PM
Posh Mini (GTT) Gearknob,Gaiter Surround & H'Brake Grip-New 'All Chrome Versions'	roland2003	GT Tuning	2	Apr 26th, 2006 02:26 PM
Handbrake grip???	MarkW19	Interior & Ice	3	Aug 14th, 2003 01:29 PM
MINI Chrome Handbrake Grip.	KenL	General Discussion	10	May 10th, 2003 06:15 AM