[roland2003]

Hi Guys, Ok some good news for you.............
Flakemeister .......... Yes we can do Brown or Beige aswell . These are to special order,the same price but takes an extra 7 days to receive. The other colours we will hold in stock.

Prices.................OK Mini 2'rs we will offer them at £79+vat per set.
Also we can provide the same mat sets but without the GTT badges for £65+vat a set.
And as a third option, if you send your stock front mats down we can supply/fit the GTT badges to your mats for £29+vat per pair

Best Regards Roland GT Tuning

[DaFlake]

Quote: Originally Posted by roland2003 (original)

Hi Guys, Ok some good news for you.............
Flakemeister .......... Yes we can do Brown or Beige aswell . These are to special order,the same price but takes an extra 7 days to receive. The other colours we will hold in stock.

Prices.................OK Mini 2'rs we will offer them at £79+vat per set.
Also we can provide the same mat sets but without the GTT badges for £65+vat a set.
And as a third option, if you send your stock front mats down we can supply/fit the GTT badges to your mats for £29+vat per pair

Best Regards Roland GT Tuning

Got you on my wish list then. I am currently buying some performance parts.

[GTT 280]

Quote: Originally Posted by roland2003 (original)

Hi Guys, Ok some good news for you.............
Flakemeister .......... Yes we can do Brown or Beige aswell . These are to special order,the same price but takes an extra 7 days to receive. The other colours we will hold in stock.

Prices.................OK Mini 2'rs we will offer them at £79+vat per set.
Also we can provide the same mat sets but without the GTT badges for £65+vat a set.
And as a third option, if you send your stock front mats down we can supply/fit the GTT badges to your mats for £29+vat per pair

Best Regards Roland GT Tuning

Good stuff, so i assume that the front grill badge can be sent in the mail for £15 (based on the above price diff.) and the engine plaque with a "260bhp" engraved on it for about a £10?

Badges badges, and more badges - *smile*

Cheers,
K.

[miniwidow]

Hi Roland,

Just joined the site & wanting to send you a PM re a quote for mats but can't seem to access PMs to you, though my hubby can. Any clues as to how I set this up???

[mikeythemini]

You need to get your post count up

[Hartge210]

Hello & welcome miniwidow (my wife is starting to call herself that as well ), as Mikey say's keep on posting, I think the post count has got to be above 5 or 6 to be able to send pm's.

[miniwidow]

Thanks for the hints..better get posting then...yep, after 3 years of being a miniwidow I thought if you can't beat 'em..join em...maybe I'll start a new mini widow thread...I can't be the only one who is talked into navigating on runs,making the sandwiches & thermos for shows ( not to mention running for the odd bucket of water for show & shine!) and always having to put the case for spending the spare cash on anything but the mini...not to mention the hours spent on the forum....anyway back to mats..... ( I chose the pink virtual mini pic [very sterotypical!] ..seeing as I haven't got my own one......yet!!!!!)

[DaFlake]

Quote: Originally Posted by miniwidow (original)

Thanks for the hints..better get posting then...yep, after 3 years of being a miniwidow I thought if you can't beat 'em..join em...maybe I'll start a new mini widow thread...I can't be the only one who is talked into navigating on runs,making the sandwiches & thermos for shows ( not to mention running for the odd bucket of water for show & shine!) and always having to put the case for spending the spare cash on anything but the mini...not to mention the hours spent on the forum....anyway back to mats..... ( I chose the pink virtual mini pic [very sterotypical!] ..seeing as I haven't got my own one......yet!!!!!)

Probably not but it would make for a fun banter or general discussion thread. Welcome to the forum!

[roland2003]

Hi Guys, badges (for mats) are £14+vat each, without nuts ( ie used for front grille) £12.50+vat each, or the type we put on the boot £10+vat each.We now have a quantity of mats in stock ,all 5 colours.
-They are vey nice.
Best regards Roland GTT

[GTT 280]

All,

Have just received a complete set of black floor mats, and front grille badge.

Here are the pictures of the floor mats...

Drivers...


Passengers...


I am just waiting until I think of the best approach for fitting the front grille badge until pictures are posted. I think clear silicone sealer was suggested, but the back of the "GTT" part is flat, and i don't want the silicone sealer showing. I'll be back....

Cheers,
K.

[roland2003]

...The GTT badge will bend ok ,the bend bias is slightlty more on the engraved lines (as its thinner here) ,but works well ...just use your hands or put the centre over a table edge and push. You cant break it or b.....er it up.
-Dont try and bend the blue anodised plate though,-that would mess up.
best Regards Roland GTT

[Rigsey]

Look very nice.....

Roland your PM box is full please can you clear out some space?

[GTT 280]

Quote: Originally Posted by roland2003 (original)

...The GTT badge will bend ok ,the bend bias is slightlty more on the engraved lines (as its thinner here) ,but works well ...just use your hands or put the centre over a table edge and push. You cant break it or b.....er it up.
-Dont try and bend the blue anodised plate though,-that would mess up.
best Regards Roland GTT

Roland,

Sorry, I think you misunderstood. I am not looking at bending anything. My reference to the flat surface was simply from an adhesive perspective. How would silicone sealer adhere to a smooth flat metallic surface.

The badge will remain perfectly flat, both the blue anodised plate and the GTT characters. Put in place over the mesh lower grille within the front aero-kit bumper against a deposit of gooey silicone sealer would be my approach. However, while it would adhere to the grill well, due to the shape of the grille parts and key-ing ability, it would not stick well to the GTT badge part, or would it????

I suppose the easiest way to find is to just do it

Cheers,
K.

[miniwidow]

Hi Roland,

Just to say thanks, the mats arrived today as promised...fantastic service, ordered Thursday, arrived Monday. They look the business & are certainly great quality when com[pared to what was in the mini. GTT has my vote!

[Jifster]

Heh He.

- All this talk of badges........

Hope you remember who first recommended you to do badge kits and suggested badged carpets, all those moons ago, Roland old bean.......


P.S. Did we ever agree on my commission???? - Just kidding. I'll put my mat set order in as soon as I can be bothered to find another job.
P.P.S. Treated myself to a very nice GTT personal number plate (i know, i know, vulgar, etc, etc), so thats MORE free advertising for thee. New alloys on their way so updated pics of my GTT up soon.