MINI2

:: Jon :: · May 23rd, 2007, 11:50 AM

sorry not my cuppa tea

ruption33 · May 23rd, 2007, 12:50 PM

Hey guys was down at rolands this moring getting a re-route pipe fitted. He showed me the tips. They are awesome. trust me if your not wanting to pay the whole hog for a propper miltek then you need these tips. Absoloute quality! I pretty sure that people will go from wanting to getting!

mcs_sam · May 23rd, 2007, 01:06 PM

Any photos on a car?

roland2003 · May 23rd, 2007, 01:14 PM

Thanks Ben. Worth mentioning is unless youve lying down you only see the end couple of inches max. (ie the large diameter pipe). So will look like a complete catback.
Best Regards Roland GTT

Richard Crofts · May 23rd, 2007, 01:22 PM

TBH the tails on the Milly are just welded on anyhow so even a full system or cat back system will look the same as this. On my milly they look like they are the 'real' pipes until the exhaust is off or your lying down like Roland says... these will look just like my milly ends untill you go poking around and discover the clamps when your underneath the car....the angle and the rear skirt hides a multitude of sins on the mini

Meeerrrk · May 23rd, 2007, 01:27 PM

i like the look of these, am very interested but i would like to know how much and if there are still a set left or if they have been snapped up?!?

James_Lee_83 · May 23rd, 2007, 05:23 PM

How do I buy a Set?

Asked to be added to the interested list, but now DEFFO want some ASAP

s_and_m · May 24th, 2007, 11:33 AM

Just let me know when I need to place my order

S

T-bone S · May 24th, 2007, 11:38 AM

Ahh!! - what about the stamped GTT logo? - the pics don't show this?

Meeerrrk · May 24th, 2007, 04:13 PM

id rather not have the GTT logo.

so how much are they, it doesnt say anywhere?!!!!!!

roland2003 · May 25th, 2007, 07:17 AM

Hi, there is no stamped logo.
Best Regards Roland GTT

ps_minics · May 25th, 2007, 10:21 AM

Roland,

Any idea when you will have a price for these? Will they be also added to your website or will they be limited to a certain amount?

Thanks

roland2003 · May 26th, 2007, 06:42 AM

Hi, The initial batch is around 20-25 sets. There will be more and they will go on our site (together with all the other new stuff still not on there).
I'll try and firm the price up next week.
Best Regards Roland GTT

barleyS · May 26th, 2007, 04:51 PM

Roland how much are these going to be? Any pics on the car?!
Tom.

Meeerrrk · May 30th, 2007, 10:41 PM

id like to be put on the list for a set please.

kimoss · May 30th, 2007, 10:57 PM

brilliant work uve done here roland, they looksuperb! exactly the reason why im on the waiting list. just a quick question tho, when the engine is on, normally the exhausts are always shaking rapidly, and these tips being bolt ons will they be able to stand all the vibrations (i.e. the bolts won't come loose?). And will any exhaust fitter be able to carry out the cutting and bolting on process without too much cost? thanks very much indeed

roland2003 · May 31st, 2007, 02:26 PM

Hi, the clamp used is more substantial than the single small grubscrew on the stock tips. So unless you forget to do up the clamps they will be nice and solid. Anyone should be able to fit including DIY. To gain better access for a hacksaw its probably going to be easier to undo the rear fixings to drop in down a couple of inches. We may be fitting the first set next saturday. I will put up pics then plus any tips on fitting the tips

ps we are making 30 sets they will be another week or two though (sorry)
Best Regards Roland GTT

Meeerrrk · May 31st, 2007, 04:12 PM

sounds good, i will order a pair & a re-route pipe. should compliment my 220kit nicely.
Mark B

Lister · May 31st, 2007, 07:33 PM

aarggghhh the suspense is killing me! You mini zorst tip teaser Roland.

I ordered the re-route pipe the other day so I will be gagging to get these on too.

alski · Jun 1st, 2007, 10:09 AM

some pics with and without your surround would be a good idea

May 23rd, 2007, 11:50 AM	#21
:: Jon :: . My Classifieds Join Date: Apr 2003 Local Time: 04:38 PM Posts: 15,109 Offline	sorry not my cuppa tea EMPTY SPACE NEEDS FILLING.... but it has to be something that wont get me banned

May 23rd, 2007, 01:14 PM	#24 (permalink)
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 04:38 PM Posts: 2,736 Offline	Thanks Ben. Worth mentioning is unless youve lying down you only see the end couple of inches max. (ie the large diameter pipe). So will look like a complete catback. Best Regards Roland GTT www.gttuning.com

May 23rd, 2007, 01:27 PM	#26 (permalink)
Meeerrrk MINI2 Senior My Classifieds Join Date: Jan 2007 Location: South Local Time: 04:38 PM Posts: 345 Offline	i like the look of these, am very interested but i would like to know how much and if there are still a set left or if they have been snapped up?!? 2002 Dark Silver & Black Cooper S : Loads 'a Mods Last edited by Meeerrrk : Jun 11th, 2007 at 02:10 PM.

May 24th, 2007, 11:33 AM	#28 (permalink)
s_and_m 220 of your finest horses Join Date: Sep 2002 Location: 6800 rpm Local Time: 04:38 PM Posts: 3,065 Offline	Looking good Just let me know when I need to place my order S

May 24th, 2007, 11:38 AM	#29 (permalink)
T-bone S MINI2 Senior Join Date: May 2006 Location: Berkshire Local Time: 03:38 PM Posts: 571 Offline	Ahh!! - what about the stamped GTT logo? - the pics don't show this? MY05 MINI COOPER S - DS/B - GTT OPTIMISED- THANKS FOR THE RIDE - ENTER THE R56 JCW

MINI2

Fuel for your MINI obsession

Performance Parts - Turbo Conversions

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

May 23rd, 2007, 12:50 PM	#22 (permalink)
ruption33 ruption33 Join Date: Apr 2007 Location: Romsey Local Time: 04:38 PM Posts: 11 Offline	Hey guys was down at rolands this moring getting a re-route pipe fitted. He showed me the tips. They are awesome. trust me if your not wanting to pay the whole hog for a propper miltek then you need these tips. Absoloute quality! I pretty sure that people will go from wanting to getting!

May 23rd, 2007, 01:06 PM	#23 (permalink)
mcs_sam MINI2 Newbie Join Date: Apr 2007 Local Time: 04:38 PM Posts: 26 Offline	Any photos on a car?

May 23rd, 2007, 01:22 PM	#25 (permalink)
Richard Crofts THE STICK Join Date: Feb 2003 Location: Worcestershire WR15 Local Time: 04:38 PM Posts: 3,070 Offline	TBH the tails on the Milly are just welded on anyhow so even a full system or cat back system will look the same as this. On my milly they look like they are the 'real' pipes until the exhaust is off or your lying down like Roland says... these will look just like my milly ends untill you go poking around and discover the clamps when your underneath the car....the angle and the rear skirt hides a multitude of sins on the mini

May 23rd, 2007, 05:23 PM	#27 (permalink)
James_Lee_83 MINI2 Newbie Join Date: May 2007 Local Time: 04:38 PM Posts: 1 Offline	How do I buy a Set? Asked to be added to the interested list, but now DEFFO want some ASAP

May 24th, 2007, 04:13 PM	#30 (permalink)
Meeerrrk MINI2 Senior My Classifieds Join Date: Jan 2007 Location: South Local Time: 04:38 PM Posts: 345 Offline	id rather not have the GTT logo. so how much are they, it doesnt say anywhere?!!!!!! 2002 Dark Silver & Black Cooper S : Loads 'a Mods

May 25th, 2007, 07:17 AM	#31 (permalink)
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 04:38 PM Posts: 2,736 Offline	Hi, there is no stamped logo. Best Regards Roland GTT www.gttuning.com

May 25th, 2007, 10:21 AM	#32 (permalink)
ps_minics MINI2 Newbie Join Date: Apr 2006 Local Time: 03:38 PM Posts: 49 Offline	Roland, Any idea when you will have a price for these? Will they be also added to your website or will they be limited to a certain amount? Thanks

May 26th, 2007, 06:42 AM	#33 (permalink)
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 04:38 PM Posts: 2,736 Offline	Hi, The initial batch is around 20-25 sets. There will be more and they will go on our site (together with all the other new stuff still not on there). I'll try and firm the price up next week. Best Regards Roland GTT www.gttuning.com

May 26th, 2007, 04:51 PM	#34 (permalink)
barleyS MINI2 Newbie Join Date: Mar 2007 Local Time: 04:38 PM Posts: 18 Offline	Roland how much are these going to be? Any pics on the car?! Tom.

May 30th, 2007, 10:41 PM	#35 (permalink)
Meeerrrk MINI2 Senior My Classifieds Join Date: Jan 2007 Location: South Local Time: 04:38 PM Posts: 345 Offline	id like to be put on the list for a set please. 2002 Dark Silver & Black Cooper S : Loads 'a Mods

May 30th, 2007, 10:57 PM	#36 (permalink)
kimoss ZondaBoy Join Date: May 2005 Location: London Local Time: 03:38 PM Posts: 167 Offline	brilliant work uve done here roland, they looksuperb! exactly the reason why im on the waiting list. just a quick question tho, when the engine is on, normally the exhausts are always shaking rapidly, and these tips being bolt ons will they be able to stand all the vibrations (i.e. the bolts won't come loose?). And will any exhaust fitter be able to carry out the cutting and bolting on process without too much cost? thanks very much indeed

May 31st, 2007, 02:26 PM	#37 (permalink)
roland2003 MINI 2 Sponsor GT Tuning Join Date: Jan 2004 Local Time: 04:38 PM Posts: 2,736 Offline	Hi, the clamp used is more substantial than the single small grubscrew on the stock tips. So unless you forget to do up the clamps they will be nice and solid. Anyone should be able to fit including DIY. To gain better access for a hacksaw its probably going to be easier to undo the rear fixings to drop in down a couple of inches. We may be fitting the first set next saturday. I will put up pics then plus any tips on fitting the tips ps we are making 30 sets they will be another week or two though (sorry) Best Regards Roland GTT www.gttuning.com

May 31st, 2007, 04:12 PM	#38 (permalink)
Meeerrrk MINI2 Senior My Classifieds Join Date: Jan 2007 Location: South Local Time: 04:38 PM Posts: 345 Offline	sounds good, i will order a pair & a re-route pipe. should compliment my 220kit nicely. Mark B 2002 Dark Silver & Black Cooper S : Loads 'a Mods

May 31st, 2007, 07:33 PM	#39 (permalink)
Lister MINI2 Regular Join Date: Mar 2007 Location: Yorkshire Local Time: 04:38 PM Posts: 72 Offline	aarggghhh the suspense is killing me! You mini zorst tip teaser Roland. I ordered the re-route pipe the other day so I will be gagging to get these on too.

Jun 1st, 2007, 10:09 AM	#40 (permalink)
alski dyno-mite, might not.... Join Date: Dec 2005 Location: banbury Local Time: 04:38 PM Posts: 954 Offline	some pics with and without your surround would be a good idea carefree

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Retro fitting JCW exhaust tips to MCS Exhaust	Cooooooperslad	Exterior	13	Jul 3rd, 2007 01:33 PM
GTT Manifold w/ Stock Exhaust	futureal33	Engine & Drivetrain Tuning	6	Jan 13th, 2007 11:54 AM
GTT v JCW v Stock. -heads/manifolds +pics	roland2003	Engine & Drivetrain Tuning	2	Jan 2nd, 2007 02:44 PM
GTT Manifold + Re route pipe + stock exhaust	futureal33	Engine & Drivetrain Tuning	9	Nov 7th, 2006 02:47 PM