S/C Pulley Removal

[Birdog]

Hello

Have read a couple of guides on this now, but I`m after some advise from someone who has actually done it, or has seen it done.

One guide suggests jacking the car and going from underneath, another guide suggests loosening the engine mount on the driver side and jacking the engine, just enough to allow access to the pulley.

Removing the pulley once I have access will be difficult, but I have the tool and a grinder if needed, the problem I have is access. Whats the best (easiest) way to go ?

Cheers for any help, and sorry if this is in the wrong section.