chris.lamb

Offline

Hello Chris,

I have found your post (http://www.mini2.com/forum/first-gen...-mini-eba.html) about the MINI EBA documents.

I hope this is not too much bother but I was wondering if you have the EBA 2218398 and if so, could you be so kind and email it to ebamanual@timmy.zyxxyz.eu.

Best regards,
--
G

hello chris. I am writin to you with regard retro fitting a chrono pack to my 53 plate mini cooper s. I notice by reading many threads on this subject that you have some experience in this or similar fitments. I have already fitted the chrono guage and twin clock on the steering column. They have been coded by a friend who has an auto logic diag, but the oil pressure and temp guages do not function also since coding the engine temp reads at 50% of what it should. In previous threads it has been mentioned that the bcm needs to be chrono+ enabled. How or who can do this? i have already been to my local dealer and spoke to them about this subject and got blank faces and sceptical remarks as to weather it is possable. i would apreciate any help you can give in this subject. thanks colin.

hi chris its ben from the mini addiction, with the bumpers that you wanted, i cant get on to the mini addiction site, so i was wondering whether you could send me a picture of your bumpers, so that i can see what they look like, so that i can see about the swap
Thanks

By the way, i would like to fit in the manual A/C (which i imagine should be easier and cheaper right?)

cheers,
Ian

Hi Chris,
I just posted a topic on Mini2 a couple of days ago regarding retrofitting an A/C on my 2005 cooper S. Would it be possible to send me some documentation on bordaian@gmail.com please? Do you think it is too big a project? will probably not be doing it myself but would like to check how much it would cost and how much work is involved!
your help would be appreciated!!
regards,
Ian