Tara&Paul

Offline

Hi Paul!!!,

I have an MC from June 2006 and having troubles with the P1125, P1125+ and P1129 error codes. I already cleaned the air flow sensor (MAP?), It was spoiled with a lot of oil and mess, And after that it worked fine for 2weeks but no its back again. Engine stalls when cold outside and i'm getting the both yellow lights EML/Motor managent and needs a reset with the ODB2 tool 2/3 times before I can drive away. Could this be the wiring or is it something with the Pedal control sensor min/max out of range?

I hope you can explain me what worked for you about the tape trick...

The strange thing about this whole thing is that it work's after 2 or 3 resets with the OBD2 tool... I heard something about exhaust issue with this error codes also?

Thanks a lot for your support!

Greets,

Glenn from Holland

Sorry for all the language faults

hi, I have a 2010 JCW how do I find if I have the redesigned the hydraulic piston to stop the timing chain running loose, ie10mm longer one? I started mine from cold the other day and had a tappet type rattle and lasted about a few mins down the road, it has done it twice now..... any help would be great :-)

Hiya,
I don't think a 7.5" wide rim will fit? I've got 18" x 7" OZ Ultraleggera's with 225/35 Toyo T1 R tyres which fit perfectly under the arch. The ET you need is 38.

Paul.

Hi there,
Really like your ride.

i ve got a R56 and for sure will pace some 18''.

I was thinking about 18 x 7.5, could you confirm me the offset et the maximum tires size allowed ?

I ll put alors sport coil over and drop the car a bit also...

Thanks for your help.

Xavier