MINI2

jonnyyellow · Oct 14th, 2004, 07:36 PM

Hi everyone.

I was wondering if anyone had the driving lights instaled. I was hoping for pictures and i was wondering if they are worth the price?
THanks

colink · Oct 14th, 2004, 08:21 PM

Have a look in my gallery - I;ve got the factory ones fitted on my MC and ordered them again on my MCS (due soon!). Personally I think they look great, although four would be cooler

jonnyyellow · Oct 14th, 2004, 09:34 PM

hey.. NICE CAR!
Colink - Do you think they will look good on a 05' mcsc? red like yours?.. thats what we have on order!.. Do you think they every help for driving?.. how much were they?

anyone got us price?

rbridges · Oct 15th, 2004, 01:56 PM

You can check miniusa.com for prices, but I believe they are 400.

TURB CAB · Oct 15th, 2004, 03:19 PM

Check "Exterior" Area

DUCTTAPE · Oct 16th, 2004, 11:41 PM

There are lots of aftermarket options which are substantially cheaper. Remember, $400 clams is NOT installed. You need to either do that yourself, or pay for it.

I'm giving thought to 4 also. Kinda neat.

Neil the Hat · Oct 17th, 2004, 05:33 PM

Have just ordered Quad Spots from Minisport.com.

They are £230 and I believe don't require activating at a dealer.

I will post photos when I have them fitted.

Neil the Hat · Oct 24th, 2004, 03:02 PM

Here are the quad spots from Minisport.com.

Took about two and a half hours to fit but it is fairly straight forward - instructions are comprehensive.

Just need tp wire them in which doesn't look hard, just need to make a connection to the high beam wire.

Hope this helps.

jonnyyellow · Oct 24th, 2004, 04:01 PM

nice lights.. they dont need dealer activation right?? and also do they ship to us? and on a 1-10 scale 10 being very ahrd and 1 being very easy waht do you rate the lights instalation.

Neil the Hat · Oct 24th, 2004, 07:24 PM

No they don't need dealer activation, just a connection to the high beam wire. Comes with a fused loom and all the gromets etc for making a nice neat job.

Not sure about the shipping to US, check out

http://www.minisport.com/worldwide-agents.html

Well I would say about a 6, the instructions are very good and if you have decent tools (including a drill and torx screw driver) then you will be ok. I used a dremel for removing the internal bumper lip to allow smooth fitting of the bar, much better than a hacksaw and neater. Needs a hole drilled into the back of the metal bumper support so a good drill is needed ( you remove the support to drill it not drill it on the car).

Hope this helps.

jonnyyellow · Oct 24th, 2004, 09:03 PM

hey, you got any idea about the ones with two lights only?
thanks

Oct 14th, 2004, 07:36 PM	#1
jonnyyellow fun fun fun! Join Date: Oct 2004 Location: New Jersey Local Time: 10:31 AM Posts: 206 Offline	Extra Driving lights? Hi everyone. I was wondering if anyone had the driving lights instaled. I was hoping for pictures and i was wondering if they are worth the price? THanks

Oct 15th, 2004, 03:19 PM	#5 (permalink)
TURB CAB MINI2 Regular Join Date: Oct 2004 Local Time: 10:31 AM Posts: 150 Offline	Check "Exterior" Area CABRIO

Oct 16th, 2004, 11:41 PM	#6 (permalink)
DUCTTAPE Only Unbalanced Join Date: Jul 2002 Location: Rockland County, NY Local Time: 10:31 AM Posts: 883 Offline	There are lots of aftermarket options which are substantially cheaper. Remember, $400 clams is NOT installed. You need to either do that yourself, or pay for it. I'm giving thought to 4 also. Kinda neat. "G-d Speed, Ed" Ya'all come on by now, ya hear! \| Hudson Bay Run - 2005

Oct 24th, 2004, 03:02 PM	#8 (permalink)
Neil the Hat MINI2 Senior My Classifieds Join Date: Sep 2004 Location: South Coast Local Time: 03:31 PM Posts: 577 Offline	Here are the quad spots from Minisport.com. Took about two and a half hours to fit but it is fairly straight forward - instructions are comprehensive. Just need tp wire them in which doesn't look hard, just need to make a connection to the high beam wire. Hope this helps. Attached Thumbnails

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

MINI2

Fuel for your MINI obsession

Discuss the latest model in the range, the MINI Convertible (Cabrio) in this dedicated forum

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Oct 14th, 2004, 08:21 PM	#2 (permalink)
colink Bugaboo Racer Join Date: Aug 2004 Location: Changin' Nappies Local Time: 03:31 PM Posts: 1,569 Offline	Have a look in my gallery - I;ve got the factory ones fitted on my MC and ordered them again on my MCS (due soon!). Personally I think they look great, although four would be cooler

Oct 14th, 2004, 09:34 PM	#3 (permalink)
jonnyyellow fun fun fun! Join Date: Oct 2004 Location: New Jersey Local Time: 10:31 AM Posts: 206 Offline	hey.. NICE CAR! Colink - Do you think they will look good on a 05' mcsc? red like yours?.. thats what we have on order!.. Do you think they every help for driving?.. how much were they? anyone got us price?

Oct 15th, 2004, 01:56 PM	#4 (permalink)
rbridges MINI2 Newbie Join Date: Jul 2004 Location: warner robins, ga Local Time: 10:31 AM Posts: 36 Offline	You can check miniusa.com for prices, but I believe they are 400.

Oct 17th, 2004, 05:33 PM	#7 (permalink)
Neil the Hat MINI2 Senior My Classifieds Join Date: Sep 2004 Location: South Coast Local Time: 03:31 PM Posts: 577 Offline	Have just ordered Quad Spots from Minisport.com. They are £230 and I believe don't require activating at a dealer. I will post photos when I have them fitted.

Oct 24th, 2004, 04:01 PM	#9 (permalink)
jonnyyellow fun fun fun! Join Date: Oct 2004 Location: New Jersey Local Time: 10:31 AM Posts: 206 Offline	nice lights.. they dont need dealer activation right?? and also do they ship to us? and on a 1-10 scale 10 being very ahrd and 1 being very easy waht do you rate the lights instalation.

Oct 24th, 2004, 07:24 PM	#10 (permalink)
Neil the Hat MINI2 Senior My Classifieds Join Date: Sep 2004 Location: South Coast Local Time: 03:31 PM Posts: 577 Offline	No they don't need dealer activation, just a connection to the high beam wire. Comes with a fused loom and all the gromets etc for making a nice neat job. Not sure about the shipping to US, check out http://www.minisport.com/worldwide-agents.html Well I would say about a 6, the instructions are very good and if you have decent tools (including a drill and torx screw driver) then you will be ok. I used a dremel for removing the internal bumper lip to allow smooth fitting of the bar, much better than a hacksaw and neater. Needs a hole drilled into the back of the metal bumper support so a good drill is needed ( you remove the support to drill it not drill it on the car). Hope this helps.

Oct 24th, 2004, 09:03 PM	#11 (permalink)
jonnyyellow fun fun fun! Join Date: Oct 2004 Location: New Jersey Local Time: 10:31 AM Posts: 206 Offline	hey, you got any idea about the ones with two lights only? thanks

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
extra driving lamps	lordpinoypol	MINI Cooper S	17	Feb 9th, 2005 07:40 AM
Extra Internal Lights	Phoenix	Interior & Ice	6	May 11th, 2004 08:39 PM
extra braking lights	wybe	General Discussion	1	Mar 15th, 2004 08:30 PM
Using installed Rear Fog Lights as Fog + Extra Brake Lights. Possible?	averyocooper	Exterior	4	Mar 3rd, 2004 07:09 PM
driving lights and black covers for them or another company that makes driving lights	phillyb	Exterior	1	Jan 20th, 2004 08:39 PM