MINI2

Fisher · Jun 28th, 2007, 09:53 PM

Hello, I have been searching but I haven't find anything about that.

I would like change the consumption on my board computer. It's about 1.3 liters/100km smaller then the real one. So I must rise it on board computer.

Is that possible? How? Service?

Thanks

Restyle · Jun 28th, 2007, 10:01 PM

Not quite sure what you mean ?
But If you mean you want to reset the overall consumption figure, then just hold down the computer stalk button when its on the consumption readout for about 5 seconds

Fisher · Jun 28th, 2007, 10:32 PM

No,

Example:

Real consumption is 9,5 liters/100km

On board consumption show 8,2liters /100km

I would like repair that. So both the real one and the board one show 9.5 liters/100km. I hope I was unequivocal now.

MINIAC · Jun 28th, 2007, 10:36 PM

I don't think there is a way to "correct" the OBC.

jbz · Jun 29th, 2007, 06:04 AM

Hi Fisher

There is away to enter a correction factor. Look under FAQ and DIY:
http://www.mini2.com/forum/faq.php?f..._obc_functions

20.0 Correction factor for Fuel consumption
Formula for correction:
Shown consumption x 1000 / user defined consumption
Push the trip reset button to begin the correction. Numbers count up from 0-9, when correct number shows push trip reset button.

20.1 Sets 10ths. for consumption factor
20.2 Sets 100ths. and 1000ths. for consumption factor
20.3 Saves the new consumption factor and shows new value

I think it is quite risky though. If you do not concentrate you may stuff up something else!

Fisher · Jun 29th, 2007, 09:40 AM

I have found this but when I was try to set up the new consumption I have recognize that my car do not have this point 20.

It's 2002 year. Is here that problem?

jbz · Jun 29th, 2007, 10:52 AM

Fisher

Sorry, I do not have more information than what is on this website.

Jun 28th, 2007, 09:53 PM	#1
Fisher MINI2 Regular Join Date: Dec 2004 Local Time: 07:27 AM Posts: 232 Offline	Board computer & consumption Hello, I have been searching but I haven't find anything about that. I would like change the consumption on my board computer. It's about 1.3 liters/100km smaller then the real one. So I must rise it on board computer. Is that possible? How? Service? Thanks

Jun 28th, 2007, 10:01 PM	#2 (permalink)
Restyle Damned My Classifieds Join Date: Jun 2002 Location: Shropshire Local Time: 06:27 AM Posts: 4,311 Offline	Not quite sure what you mean ? But If you mean you want to reset the overall consumption figure, then just hold down the computer stalk button when its on the consumption readout for about 5 seconds In da Wud

Jun 29th, 2007, 06:04 AM	#5 (permalink)
jbz MINI2 Newbie Join Date: Sep 2006 Location: Pretoria Local Time: 07:27 AM Posts: 13 Offline	It is possible Hi Fisher There is away to enter a correction factor. Look under FAQ and DIY: http://www.mini2.com/forum/faq.php?f..._obc_functions 20.0 Correction factor for Fuel consumption Formula for correction: Shown consumption x 1000 / user defined consumption Push the trip reset button to begin the correction. Numbers count up from 0-9, when correct number shows push trip reset button. 20.1 Sets 10ths. for consumption factor 20.2 Sets 100ths. and 1000ths. for consumption factor 20.3 Saves the new consumption factor and shows new value I think it is quite risky though. If you do not concentrate you may stuff up something else!

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
on board computer...	sobaphobic	Interior & Ice	15	Sep 14th, 2007 07:08 AM
On Board Computer	David43	Interior & Ice	12	Jan 30th, 2006 03:30 PM
On Board Computer	Shay	Interior & Ice	16	Oct 1st, 2003 07:53 PM
On board computer	danpeppett	General Discussion	2	May 27th, 2001 04:34 AM

MINI2

Fuel for your MINI obsession

Discussions concerning the Cooper S

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Jun 28th, 2007, 10:32 PM	#3 (permalink)
Fisher MINI2 Regular Join Date: Dec 2004 Local Time: 07:27 AM Posts: 232 Offline	No, Example: Real consumption is 9,5 liters/100km On board consumption show 8,2liters /100km I would like repair that. So both the real one and the board one show 9.5 liters/100km. I hope I was unequivocal now.

Jun 28th, 2007, 10:36 PM	#4 (permalink)
MINIAC MINI Profiler Join Date: Feb 2001 Location: City By The Bay Local Time: 10:27 PM Posts: 8,161 Offline	I don't think there is a way to "correct" the OBC.

Jun 29th, 2007, 09:40 AM	#6 (permalink)
Fisher MINI2 Regular Join Date: Dec 2004 Local Time: 07:27 AM Posts: 232 Offline	I have found this but when I was try to set up the new consumption I have recognize that my car do not have this point 20. It's 2002 year. Is here that problem?

Jun 29th, 2007, 10:52 AM	#7 (permalink)
jbz MINI2 Newbie Join Date: Sep 2006 Location: Pretoria Local Time: 07:27 AM Posts: 13 Offline	Fisher Sorry, I do not have more information than what is on this website.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)