MINI2

bungle77 · Feb 16th, 2005, 04:33 PM

It's happening again! Just in time for the good weather. Here are some details:

What: Pulley Party and then some.
When: April 9th and 10th
Where: Yarrowsport, Providence, RI

Directions
From 95 North: Take exit 17(Elmwood Ave). Left at end of ramp onto Elmwood Ave. Right onto Thurston St. Follow street to the end.
From 95 South: Take exit 16 toward Cranston (Rt 10). Stay right after exit towards Elmwood Ave. Right at end on ramp onto Elmwwod Ave. Take third right onto Thurston St. Follow street to the end.

The Pulley Party will again be held at Yarrowsport. This means there will be a Dyno available for use. Also, you will be able to get almost anything installed! Exhausts, pulleys, intakes, sway bars, springs, ect... Yarrow and his staff will be there with Randy and they are all available for installs, oil changes, or any other odds and ends you can think of.

There will also be a drive planned for both Saturday and Sunday so anyone who gets goodies installed will be able to test them out. I will also be hosting a BBQ for all attendees on Saturday night. Please let me know if you would like to stop by.

I encourage all to attend this event. Installs or not, it will be a good time.

If you are interested in having something installed please visit the link below and post what you would like to have done and the time slot you would like.
http://www.webbmotorsports.com/forum...opic.php?t=597

minimort · Feb 16th, 2005, 11:24 PM

I'm there!

Who's with me?

onasled · Feb 17th, 2005, 01:43 AM

Just to let you know if you don't, Randy has a group buy going on for Miltec Catback going on. Might be about four or so left. Great system!

bungle77 · Feb 17th, 2005, 01:16 PM

Quote: Originally Posted by onasled

Just to let you know if you don't, Randy has a group buy going on for Miltec Catback going on. Might be about four or so left. Great system!

Very good to know... I have one and love it. Sounds good but not too loud

.

Do you know how much its being offered for?

minimort · Feb 17th, 2005, 07:04 PM

It's $599, plus shipping

MudBud · Feb 22nd, 2005, 03:59 AM

Yea it will kinda early to drive on those Mass roads, but a trip to RI for a pulley, Intake, and crank Pulley will be worth it. Maybe I will break the 6200 mark during the run.

Windshadow · Feb 22nd, 2005, 04:16 AM

Hummm Might be a fun first birthday gift For Ghillie... does the pulley include the Chip upgrade? and is it a 15% or 18% Pulley? and of course the big question how much?

pezboy · Feb 22nd, 2005, 09:20 AM

The usual is 15%, there are also 17% and 19%. I think he would do 17% but tries to stay away from 19%.

Price may vary on those, but most people do the 15% which is $400 including pulley and install. No chip upgrade. He will put on an intake with no additional install fee since he has to take the stock one apart anyway to do the pulley.

Actual Size · Feb 22nd, 2005, 09:30 AM

Randy said he'll put in a 19% if you really want it but his warranty expires once you drive it away.

pezboy · Feb 22nd, 2005, 09:32 AM

JCW is ~15% so I think that is a pretty good number to go by.

PMello · Feb 22nd, 2005, 10:22 AM

I'll do a Sat dyno at the very least. I want to establish a baseline for the 2005s. I wonder if Unichip tuning can be done?

Windshadow · Feb 22nd, 2005, 11:18 PM

I just spent some time at his mebb site

and I have to say you would have one very expensive MINI if you did everything he offers... mind you I expect you would shock some drivers of expensive stock sports cars but Wow!

bungle77 · Feb 25th, 2005, 12:52 PM

Please make this sticky.

bungle77 · Mar 3rd, 2005, 01:07 PM

Please

pezboy · Mar 3rd, 2005, 01:09 PM

PM AprilWhine and ask her. Or GMINI, but he is often off in la-la land.

bungle77 · Mar 3rd, 2005, 01:11 PM

Quote: Originally Posted by pezboy

PM AprilWhine and ask her. Or GMINI, but he is often off in la-la land.

Thanks

Theo · Mar 10th, 2005, 05:50 PM

Does anyone know how much the dyno pulls will be? If I remember, last year they were $50.

Theo

bungle77 · Mar 10th, 2005, 07:21 PM

Quote: Originally Posted by Theo

Does anyone know how much the dyno pulls will be? If I remember, last year they were $50.

Theo

I think it was $50.00 for three pulls... but that was because we had a certain number of cars. I think the normal price is $65.00. So it could be one or the other depending on attendance.

bungle77 · Mar 10th, 2005, 07:23 PM

Here is the link to the Dyno Day we had last Sept.

http://www.mini2.com/forum/showthrea...ht=yarrowsport

it has the pricing.

GadgetGav · Mar 10th, 2005, 09:47 PM

Wot, no sig bungle..??

Feb 16th, 2005, 04:33 PM	#1
bungle77 Small state, small car Join Date: Aug 2003 Location: Warwick, RI Local Time: 12:54 AM Posts: 383 Offline	Pulley Party Plus II - Providence, RI - Apr. 9-10th It's happening again! Just in time for the good weather. Here are some details: What: Pulley Party and then some. When: April 9th and 10th Where: Yarrowsport, Providence, RI Directions From 95 North: Take exit 17(Elmwood Ave). Left at end of ramp onto Elmwood Ave. Right onto Thurston St. Follow street to the end. From 95 South: Take exit 16 toward Cranston (Rt 10). Stay right after exit towards Elmwood Ave. Right at end on ramp onto Elmwwod Ave. Take third right onto Thurston St. Follow street to the end. The Pulley Party will again be held at Yarrowsport. This means there will be a Dyno available for use. Also, you will be able to get almost anything installed! Exhausts, pulleys, intakes, sway bars, springs, ect... Yarrow and his staff will be there with Randy and they are all available for installs, oil changes, or any other odds and ends you can think of. There will also be a drive planned for both Saturday and Sunday so anyone who gets goodies installed will be able to test them out. I will also be hosting a BBQ for all attendees on Saturday night. Please let me know if you would like to stop by. I encourage all to attend this event. Installs or not, it will be a good time. If you are interested in having something installed please visit the link below and post what you would like to have done and the time slot you would like. http://www.webbmotorsports.com/forum...opic.php?t=597

Feb 17th, 2005, 07:04 PM	#5 (permalink)
minimort King of Holden Join Date: Aug 2004 Location: Holden, Mass Local Time: 12:54 AM Posts: 351 Offline	It's $599, plus shipping Last edited by minimort : Feb 17th, 2005 at 07:24 PM. Reason: correcting price

Feb 22nd, 2005, 03:59 AM	#6 (permalink)
MudBud Expect Anything Else? Join Date: Apr 2003 Location: Kittery Point, Maine Local Time: 11:54 PM Posts: 281 Offline	OH Boy Yea it will kinda early to drive on those Mass roads, but a trip to RI for a pulley, Intake, and crank Pulley will be worth it. Maybe I will break the 6200 mark during the run. 2003 DS/DS MCS

Feb 22nd, 2005, 04:16 AM	#7 (permalink)
Windshadow MINI2 Master Join Date: Nov 2003 Location: Newcastle Maine Local Time: 12:54 AM Posts: 2,450 Offline	Hummm Might be a fun first birthday gift For Ghillie... does the pulley include the Chip upgrade? and is it a 15% or 18% Pulley? and of course the big question how much? S BRG/W Randolph 3 PAC NAV Mid Coast Maine, U.S.A.

Feb 22nd, 2005, 09:20 AM	#8 (permalink)
pezboy heh...lame Join Date: Aug 2002 Location: Boston, MA Local Time: 12:54 AM Posts: 2,345 Offline	The usual is 15%, there are also 17% and 19%. I think he would do 17% but tries to stay away from 19%. Price may vary on those, but most people do the 15% which is $400 including pulley and install. No chip upgrade. He will put on an intake with no additional install fee since he has to take the stock one apart anyway to do the pulley. "Just keep heading into the wind. Don't let anything blow you over." Ed Smith / MaxaMini 6/14/05

MINI2

Fuel for your MINI obsession

For meeting people,arranging events/activities and discussing issues in your local area!

Today
Sponsors	Sponsored Links Registered members do not see Google Ads posts, they can also post messages, pictures, and classified adverts. Register your free account today and become a member of MINI2 - MINI Forum

Feb 16th, 2005, 11:24 PM	#2 (permalink)
minimort King of Holden Join Date: Aug 2004 Location: Holden, Mass Local Time: 12:54 AM Posts: 351 Offline	I'm there! Who's with me?

Feb 17th, 2005, 01:43 AM	#3 (permalink)
onasled MINI2 Senior My Classifieds Join Date: Sep 2004 Location: Northeast, Ct Local Time: 12:54 AM Posts: 441 Offline	Just to let you know if you don't, Randy has a group buy going on for Miltec Catback going on. Might be about four or so left. Great system!

Feb 17th, 2005, 01:16 PM	#4 (permalink)
bungle77 Small state, small car Join Date: Aug 2003 Location: Warwick, RI Local Time: 12:54 AM Posts: 383 Offline	Quote: Originally Posted by onasled Just to let you know if you don't, Randy has a group buy going on for Miltec Catback going on. Might be about four or so left. Great system! Very good to know... I have one and love it. Sounds good but not too loud . Do you know how much its being offered for?

Feb 22nd, 2005, 09:30 AM	#9 (permalink)
Actual Size Twi§ted Roads Join Date: Mar 2003 Location: Big MAMA's House Local Time: 12:54 AM Posts: 5,813 Offline	Randy said he'll put in a 19% if you really want it but his warranty expires once you drive it away. www.mini-mama.org

Feb 22nd, 2005, 09:32 AM	#10 (permalink)
pezboy heh...lame Join Date: Aug 2002 Location: Boston, MA Local Time: 12:54 AM Posts: 2,345 Offline	JCW is ~15% so I think that is a pretty good number to go by. "Just keep heading into the wind. Don't let anything blow you over." Ed Smith / MaxaMini 6/14/05

Feb 22nd, 2005, 10:22 AM	#11 (permalink)
PMello MINI2 Newbie Join Date: Nov 2003 Location: Middletown, RI Local Time: 11:54 PM Posts: 40 Offline	Saturday Dyno for me. I'll do a Sat dyno at the very least. I want to establish a baseline for the 2005s. I wonder if Unichip tuning can be done?

Feb 22nd, 2005, 11:18 PM	#12 (permalink)
Windshadow MINI2 Master Join Date: Nov 2003 Location: Newcastle Maine Local Time: 12:54 AM Posts: 2,450 Offline	I just spent some time at his mebb site and I have to say you would have one very expensive MINI if you did everything he offers... mind you I expect you would shock some drivers of expensive stock sports cars but Wow! S BRG/W Randolph 3 PAC NAV Mid Coast Maine, U.S.A.

Feb 25th, 2005, 12:52 PM	#13 (permalink)
bungle77 Small state, small car Join Date: Aug 2003 Location: Warwick, RI Local Time: 12:54 AM Posts: 383 Offline	Please make this sticky.

Mar 3rd, 2005, 01:07 PM	#14 (permalink)
bungle77 Small state, small car Join Date: Aug 2003 Location: Warwick, RI Local Time: 12:54 AM Posts: 383 Offline	Please

Mar 3rd, 2005, 01:09 PM	#15 (permalink)
pezboy heh...lame Join Date: Aug 2002 Location: Boston, MA Local Time: 12:54 AM Posts: 2,345 Offline	PM AprilWhine and ask her. Or GMINI, but he is often off in la-la land. "Just keep heading into the wind. Don't let anything blow you over." Ed Smith / MaxaMini 6/14/05

Mar 3rd, 2005, 01:11 PM	#16 (permalink)
bungle77 Small state, small car Join Date: Aug 2003 Location: Warwick, RI Local Time: 12:54 AM Posts: 383 Offline	Quote: Originally Posted by pezboy PM AprilWhine and ask her. Or GMINI, but he is often off in la-la land. Thanks

Mar 10th, 2005, 05:50 PM	#17 (permalink)
Theo Resident Panpsychist Join Date: Aug 2003 Location: Denial, Egypt Local Time: 12:54 AM Posts: 2,375 Offline	Does anyone know how much the dyno pulls will be? If I remember, last year they were $50. Theo "The nice thing about Alzheimer's is you get to hide your own Easter eggs." - John McCain

Mar 10th, 2005, 07:21 PM	#18 (permalink)
bungle77 Small state, small car Join Date: Aug 2003 Location: Warwick, RI Local Time: 12:54 AM Posts: 383 Offline	Quote: Originally Posted by Theo Does anyone know how much the dyno pulls will be? If I remember, last year they were $50. Theo I think it was $50.00 for three pulls... but that was because we had a certain number of cars. I think the normal price is $65.00. So it could be one or the other depending on attendance.

Mar 10th, 2005, 07:23 PM	#19 (permalink)
bungle77 Small state, small car Join Date: Aug 2003 Location: Warwick, RI Local Time: 12:54 AM Posts: 383 Offline	Here is the link to the Dyno Day we had last Sept. http://www.mini2.com/forum/showthrea...ht=yarrowsport it has the pricing.

Mar 10th, 2005, 09:47 PM	#20 (permalink)
GadgetGav gadgetmeister Join Date: Mar 2002 Location: This Old House Local Time: 12:54 AM Posts: 6,133 Offline	Wot, no sig bungle..??

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Rate This Thread
Rate This Thread:

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
pulley party	JackAss	Canada	0	Jul 3rd, 2005 12:12 AM
Pulley Party Plus - Providence, RI - Nov. 6&7	bungle77	New York & New England Region	30	Nov 16th, 2004 01:17 PM
Providence Pulley Party?	onasled	New York & New England Region	5	Oct 20th, 2004 11:12 AM
Providence Pulley Party?	onasled	New York & New England Region	0	Oct 18th, 2004 03:23 AM
Aug 10th BEACH PARTY	minimaster	Southern California Region	3	Aug 9th, 2003 09:17 AM