[hollinshead]

Mikey, I was hoping you could help with this one.

I am looking to add Ipod connectivity to my 06 MCS, but was wanting ideally for the ipod to be hidden away somewhere. My first thought was the glovebox, but my car has climate control, and has decided it would be a good idea to turn my glovebox into the artic circle!

I'm not sure having the Ipod in there would do it the best of good, am I right in thinking the only real option is to go down the Armrest route?

[DaFlake]

I have mine in the glove box and you can close the little vent if it is too cold in there.
Works fine with no problems.

[hollinshead]

Quote: Originally Posted by DaFlake (original)

I have mine in the glove box and you can close the little vent if it is too cold in there.
Works fine with no problems.

Really?

How do you close the vent?

Mine has some strange black sticky out bit?

Also what did you do about getting the cable into the glovebox, just drill a hole?

[GBMINI]

The sticky out bit can be turned, to open/close the vent hole

[DaFlake]

There was also a rectangular black piece that I popped out in the back to run the cable.

[minicabrio]

Yup, I fitted the Dension kit (plug and play) to mine a few weekends ago - purchased from NewMINIStuff.com.

There's a small black cover in the back right of the glovebox I popped off and ran the cables through.

The stereo is easier to remove in the 06 too, just open the glovebox, and unscrew the two screws in the downtube, then pop off the drivers side knee bolster and do the same. The downtubes then drop down and out the way, exposing the stereo retaining screws

I have some pics at home, will upload later if I remember!

[James]

I don't think itll get cold enough to damage your ipod, think how cold it gets in your car when its snowing etc it must get below freezing then which I doubt the air con can do lol

[Martin F]

The temperature operating range of an ipod nano is 0-35 deg. C. I expect other models are similar and I doubt that your glove box will go below this range.

[hollinshead]

Quote: Originally Posted by GBMINI (original)

The sticky out bit can be turned, to open/close the vent hole

Cheers for that!

Did you guys just leave the black plastic piece out when you'd run the cable, or did you drill a hole in it?

[DaFlake]

I left mine out.

[minicabrio]

Left mine out too.... the hole is fairly small, and its up in the glovebox so you only see it when the lids open

Plus is dark back there in the cars firewall, so you can't see anything

[hollinshead]

Cheers for the info, is there any chance of you posting some pictures of it?

[Hugo]

I put mine in the glove box and drilled a hole in the plastic insert to run the cable through.



I put the Gateway 100 underneath the glove box and stuck it with double sided tape.




hope this helps

[mikeythemini]

.... what more can I say that hasn't been said - thanks guys

[hollinshead]

Quote: Originally Posted by Hugo (original)

I put mine in the glove box and drilled a hole in the plastic insert to run the cable through.

Attachment 148545

I put the Gateway 100 underneath the glove box and stuck it with double sided tape.

Attachment 148544


hope this helps

Cheers for that Hugo, is yours not a 300? or does the 100 have a big box bit aswell?

[GBMINI]

The 100 is about half the width of the 300, but just as long