R56 Cooper S Remap

[GoFaStEr]

Quote: Originally Posted by Performance_Torque (original)

Hi

Yes, we can limit torque further.

Please post your graph up or e-mail it me at info@p-torque.co.uk so I can examine it

Thanks

Hi sorry i was so long, here are the graphs

Please let me know your thoughts

p.s) also i had the power run done only about 2k before its service & since the service it feels a bit fresher. Could the service, clean oil / filters etc have improved the power any or would it not be noticable?

[GoFaStEr]

Also, does 'AT' stand for air temperature? Presumably the lower the temperature the more power? i took the car out on one of the icy eves we had recently, temperature gauge said -8.5c & the car felt quite a bit quicker i thought

[bateman]

Hello

I own a R56 MCS, but i live in sweden. How/where can i get this remap done on my car ?

[Slasheraki]

Hello,

I own a MCS r56 12/2006 and like to ask whether i can get a remap for my car in Greece that i live. I have already a full milltek exhaust, a JCW filter and a forge intercooler. If the remap is possible here will i have any problems with the fuel used here and the heat ? (95 and 100 octane petrol and top temps of 40 degrees celcius in the summer, usually around 35)

Thanks in advance

[Ottoman]

Can the remap remove the CEL associated with the Catless downpipe?

[Performance_Torque]

Quote: Originally Posted by Ottoman (original)

Can the remap remove the CEL associated with the Catless downpipe?

Hi

Yes, we can map out the lambda to stop engine lights with de-cat

[johntt]

is it possible to re map a mini cooper S '08 R56 from distance? the car is in Greece. If yes what do you need and how long does it takes?
thanks

[Performance_Torque]

Quote: Originally Posted by johntt (original)

is it possible to re map a mini cooper S '08 R56 from distance? the car is in Greece. If yes what do you need and how long does it takes?
thanks

Hi John

Please send me an e-mail to info@p-torque.co.uk

Thanks!

[N1kki3]

Hi just joined and I think I will upgrade the mrs motor with this fun map, Will or Ben, where r u based and did u guys manage to work out a new map with the miltek system?
Her car is a 2008 1.6t standard cooper s.
What would u recommend for the car to breath properly?
Jcw panel filter? And is there a difference in the turbo I.e vf, td04. Again we r new to minis and could do with the help
Thanks again

[Performance_Torque]

Quote: Originally Posted by N1kki3 (original)

Hi just joined and I think I will upgrade the mrs motor with this fun map, Will or Ben, where r u based and did u guys manage to work out a new map with the miltek system?
Her car is a 2008 1.6t standard cooper s.
What would u recommend for the car to breath properly?
Jcw panel filter? And is there a difference in the turbo I.e vf, td04. Again we r new to minis and could do with the help
Thanks again

Hi!

We offer various stages of upgrade for the R56 Cooper S:

210hp Stage 1 = £345.00 all in (Remap alone)
230hp Stage 2 = £855.00 all in (Remap/Milltek Downpipe)
240hp Stage 3 = £1450.00 all in (Remap, Milltek Downpipe/Large intercooler)
250hp Stage 4 = £1915.00 all in (As above but with Milltek cat-back exhaust)


All of the above include VAT, fitting, and dyno power runs before and after

[snrsarg]

those that have had this done, what difference have you seen with fuel economy?

And where in W.Mids are you Will?

[Performance_Torque]

Quote: Originally Posted by snrsarg (original)

those that have had this done, what difference have you seen with fuel economy?

And where in W.Mids are you Will?

Hi

We are in Wolverhampton.

We have had some customers reporting back with improvements of 5MPG, depending on which package you opt for

[N1kki3]

[quote=snrsarg;3843092]those that have had this done, what difference have you seen with fuel economy?

And where in W.Mids are you Will?

Good question Snrsarg forgot to ask that.
I found that after my first map of my Scooby with decat it mad 340hp with 346lp torque and I could also see that the mpg was so much better. After more mods I got it mapped again 385hp 350lp and the mpg was terrible again.
Will could u pm me your address please. Cheers and I hope my wife apricates this

[Performance_Torque]

[quote=N1kki3;3843138]

Quote: Originally Posted by snrsarg (original)

those that have had this done, what difference have you seen with fuel economy?

And where in W.Mids are you Will?

Good question Snrsarg forgot to ask that.
I found that after my first map of my Scooby with decat it mad 340hp with 346lp torque and I could also see that the mpg was so much better. After more mods I got it mapped again 385hp 350lp and the mpg was terrible again.
Will could u pm me your address please. Cheers and I hope my wife apricates this

Hi

We are at Unit 6B, Heath Mill Rd, WV5 8AP

You can check more details at Vehicle Tuning Specialists | Performance Torque | P-Torque too