[WissCooperS]

Hello all..

i have a cooper S 2002 and would like to add the JCW suspension kit primarily cause im not looking to lower the car too much (alternative suggestions welcome!)

The thing is, ive found a PDF stating that its not for cars before 2004... is this true? what am i missing here.. please read page 4 of the attached PDF..

Also.. the springs are always sold separately... where can i order the springs and suspension kit outside my local dealer (i.e., online supplier?)

Thanks!

[WissCooperS]

sorry ...PDF was too large.. copied a section out of it...

[RVW]

Quote: Originally Posted by WissCooperS

Hello all..

i have a cooper S 2002 and would like to add the JCW suspension kit primarily cause im not looking to lower the car too much (alternative suggestions welcome!)

The thing is, ive found a PDF stating that its not for cars before 2004... is this true? what am i missing here.. please read page 4 of the attached PDF..

Also.. the springs are always sold separately... where can i order the springs and suspension kit outside my local dealer (i.e., online supplier?)

Thanks!

I should check your facts a bit closer and read the PDF a bit slower.
I have a Jan 03 Works S and it has JCW suspension fitted by JCW
It does not fit the convertable because they have not developed it yet.
Hope this helps

[Ian Kuah]

Quote: Originally Posted by WissCooperS

Hello all..

I have a cooper S 2002 and would like to add the JCW suspension kit primarily cause im not looking to lower the car too much (alternative suggestions welcome!)

The thing is, ive found a PDF stating that its not for cars before 2004... is this true? what am i missing here.. please read page 4 of the attached PDF..

Also.. the springs are always sold separately... where can i order the springs and suspension kit outside my local dealer (i.e., online supplier?)

Thanks!

I am a contributor to BMW Car Magazine and former contributor to Go MINI, and I own a September 2001 Cooper.

As I wanted to fit the JCW kit to improve my own cars ride and handling after testing Mike Cooper's personal car for BMW Car's Jan 2006 issue, I put this question to JCW directly.

JCW say there is no difference in the suspension mounting points from May 2002 (when Cooper S was launched) to the present, so the statement implying that the suspension mounts on late 2004-on cars are somehow different is a red herring.

The mods made in April 2002 were done to overcome a problem that occured in some (not mine!) cars, which caused them to pull to one side down cambers. The revised suspension struts feature a new top mount and anti-roll bar drop link as the position of the roll bar mounting point was changed on the new style strut.

BMW are not daft so there is no expensive sheet metal change on the bodywork. Thus, all you need to do to use the Mk 2 suspension on an early car is to buy the new style top mounts, bolts and anti-roll bar drop links from your local BMW dealer. Total cost is around £80 including VAT.

Hope this puts the myths to rest once and for all.

[bonz]

Just a quick note about the JCW suspension upgrade on an 02 "S". I had that upgrade done on Greta last year. There was a slight body mod that had to be performed to, I guess, prevent the rear suspension from bottoming out.

BEFORE


AFTER


For pics of complete install go here:
JCW Suspension upgrade

Later