Hello all. I've just bought a 2010 Cooper D and would like some advice.
I've had a look at various other threads but none seem to point to the same as attached. Any ideas would be welcomed.
Main beam not working drivers side. Checked voltage on both headlights. Showing 13V on both Low and high beam connectors on drivers side and passenger side when lights are not on. When low beam is on the low beam connector shows 14.6V on both sides, when High beam is on the high beam connector shows 14.6V on both sides. The earth connector is showing good earth. However, when the Main Bean is switched on (either flashing or permanently) only the passenger side will stay on. I have noticed that the drivers main beam will come on for a second and then goes off.
I've had a look at various other threads but none seem to point to the same as attached. Any ideas would be welcomed.
Main beam not working drivers side. Checked voltage on both headlights. Showing 13V on both Low and high beam connectors on drivers side and passenger side when lights are not on. When low beam is on the low beam connector shows 14.6V on both sides, when High beam is on the high beam connector shows 14.6V on both sides. The earth connector is showing good earth. However, when the Main Bean is switched on (either flashing or permanently) only the passenger side will stay on. I have noticed that the drivers main beam will come on for a second and then goes off.