Join Date: Apr 2017
Location: down west somewhere
Local Time: 05:51 PM
Mentioned: 14 Post(s)
Quoted: 631 Post(s)
Originally Posted by Stormbringer55 View Post
Thanks , I noticed the smell the day after I collected it .Its back at the garage ,they have replaced all the seals,I was supposed to get it back Saturday but number 2 is still leaking passed the new seal .Interestingly I think number 2 injector had previously been replaced as it looked new .
So further work to be done .
They also replaced the brake vacuum sensor as the stop start was not working .
The fault was cleared but the stop start still is not working .
The cleaned area .
concerning its had that injector out or changed before and you still have a issue not sealing, i would now question whether last owner drove it with seal leaking for a while and has damaged the injector seat in the head..
below is a link for cutting tool to clean and cut fresh seat for injector to sit on https://www.ebay.co.uk/itm/17pc-Dies...AAAOSwxg5Xx~Yn
disclaimer,,, but it might not be true
Albert Einstein: The definition of insanity is doing the same thing over and over and expecting different results.