MINI Cooper Forum banner

2007 R56 non turbo front crank shaft seal replacement

1046 Views 1 Reply 2 Participants Last post by  Smoothdriver
Can anyone please tell me the correct depth to recess the crank shaft seal from face of block to face of seal?
the manual I have tells me to set it to the existing seals depth, but of coarse I read that right after I removed the old one from the block and had installed the new one flush. To which now I believe to be incorrect.
I could buy the tool to install the seal but I really do not wish to spend the money they are asking for one.

Thanks for reading my post.
1 - 2 of 2 Posts
Good write up on this job here

1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.