below link good info on turbo's and twin scroll etc also whats used on mini cooper s
borgwarner turbo's training book link
Join the discussion
Recommended Reading
-
2008 mini base n12 engine wont start
MINI Engine & Drivetrain TuningI rebuilt my mini n12 engine put it back in checked all the connections and tried to start. It will crank but it will not start, I have spark and fuel but still no start, please help.- 39
- 857
-
jmshlbrt · updated
-
07 R56 Project car - stuck on engine issues
MINI Engine & Drivetrain TuningI purchased an 07 Turbo 6sp as a project car for my son and I to work on. It was suspected of having a faulty timing chain and had not run in 2 years so we paid a fairly low price for it. Once we hade the valve cover off we determined that the timing chain was not in bad shape so a compression...- 3
- 160
-
Dinan sport tuner vs Burger JB plus
MINI Engine & Drivetrain TuningBoth easy to install plug and play. Pros/cons of either or both? thoughts? recommendations?- 0
- 313
-
Oil Pressure issues
MINI Engine & Drivetrain TuningI have a 2010 mini cooper s n18 engine and i have been getting errors 33ff and 33fd. I also have an occasional issue with the car going into limp mode which will go off once the engine is restarted, since these issues have started the car has been taken off the road for 6 months and i al looking...- 1
- 101
-
2008 n12 piston pin size question
MINI Engine & Drivetrain TuningHello I’m new to the group. Hoping someone can help. I have a 2008 base dohc n12 Lucky Patcher Kodi Anyone know the size of the pin that connects the piston to the connecting rod? I can’t seem to find the exact answer. Keep hearing between 18mm and 22mm Mobdro Thank you- 2
- 203
Join now to ask and comment!