MINI Cooper Forum banner

1 - 3 of 3 Posts

·
the DASH LIGHT king ? ;)
Joined
·
485 Posts
Discussion Starter #1
14.0 - 14.4 On board diagnostic codes. eg 000000 = no failures ...........102100 is what i have !!!

went into self diagnosis on the speedo and had 102100 on my screen instead of 000000 which means no faults !

any one know what this code stands for, i know its a long shot but who knows ?
 

·
Registered
Joined
·
206 Posts
Is there a way to figure this out? The Bentley manual has "PCode" and "MINI-FC" codes. The Pcodes are the standard OBD-II codes, mostly start with a "P" and then 4 digits. The "MINI-FC" should be specific to MINI (perhaps the same as BMW codes?), and are 2-4 digits long.

Unfortunately, these are different from the what the car gives in the self diagnostics, which are all 6 characters long.

If your check engine light is off, it is hopefully (probably?) a problem which was fixed/fixed itself, and only the "freeze frame," the recording of the old error remains.
 
1 - 3 of 3 Posts
Top