[Pgiffers1]

I recently purchased an 06 cooper which had a stiff gear change, while replacing the offending pin in the linkage assembly ( superb fix!) I found the linkage cable assembly rod end bushing was completely shot and needs replacing. After many searches on the net I can’t find the bushing in the rod end, can anyone point me in the right direction?? Or am I going to have to change the whole cable assembly?
Many thanks in advance!

 

[mike1967]

I recently purchased an 06 cooper which had a stiff gear change, while replacing the offending pin in the linkage assembly ( superb fix!) I found the linkage cable assembly rod end bushing was completely shot and needs replacing. After many searches on the net I can’t find the bushing in the rod end, can anyone point me in the right direction?? Or am I going to have to change the whole cable assembly?
Many thanks in advance!

https://www.ebay.co.uk/itm/Gear-Cha...c:g:0h4AAOSwqGlaoNJr:rk:1:pf:1&frcectupt=true
https://www.ebay.co.uk/itm/Gear-Cha...4:g:WIIAAOSwA1pan0WN:rk:2:pf:1&frcectupt=true
cables

 

[Pgiffers1]

Thanks for the info, I will prepare for a cable change then!

 

[mike1967]

Thanks for the info, I will prepare for a cable change then!

i would contact the seller with your reg number before just to make sure they fit, new cables just transform them