How Do You Install Chrome Shark Grill Repeaters?

Very easy - 5 to 10 minutes

Just be careful when fitting the clips of the new grills in place - they can break quite easily. Tiny bit(not much) of lubricant/grease might help ease it in

Rooster said:

Very easy - 5 to 10 minutes

Just be careful when fitting the clips of the new grills in place - they can break quite easily. Tiny bit(not much) of lubricant/grease might help ease it in

Click to expand...

Thanks, So I presume I was right about having to prize the existing ones off? How difficult is that bit? are they in quite tight?

Sorry should have explained-

Open the bonnet. from inside, put your hand where the side vent is and theres a clip at the front of the original vent. Push it and it will come out.
Unscew and unclip the original bulb and replace vent the way it came out. Like I said be careful not to snap the end. you'll know which end I mean when you look at the back of the vent.

J0nesy said:

Thanks, So I presume I was right about having to prize the existing ones off? How difficult is that bit? are they in quite tight?

Click to expand...

No - Pushing originals out is easy, the difficult bit can be puting the new ones in-there just a bit stiff- You might be lucky. I had a problem putting the first one in but the second one was a doddle.

I only put mine in 2/3 weeks ago.

Rooster said:

No - Pushing originals out is easy, the difficult bit can be puting the new ones in-there just a bit stiff- You might be lucky. I had a problem putting the first one in but the second one was a doddle.

Click to expand...

Cheers for the Advice fella

I know what 2 expect now!

Cheers again,

Dave,

The trick is... when you push the new ones in hold the metal bit of the mini at the back of the pin, otherwise when you push the new ones it just pushes the lug it is locating into back and wont seat properly, so at the same time as you push new ones in, push back from the back!