MINI Cooper Forum banner

1 - 18 of 18 Posts

·
Registered
Joined
·
20 Posts
Discussion Starter #1
Hi All

I am going to be trying my best to offer all on here the best sevice I can. If any of you need any advice or information regarding performance products just let me know. Hopefully i will be of some help!

I have and will be negotiating some more with a lot of vairous suppliers over the coming months to arrange some fantastic special offers for you all. So watch this space!

Cheers
John
 

·
Boosted
Joined
·
480 Posts
Wouldn't mind seeing a super dooper price on the NM Engineering rear sway bar! :)
 

·
Registered
Joined
·
20 Posts
Discussion Starter #3
I was looking at putting something together for you all with NM Engineering. How about 10% off ANY NM Engineering item for starters and if there is any interest for quantities of 5 and over then we'll do 20% off. At the minute we have not put a stock in but we do get a regular delivery every 2 weeks. How about that for starters?
 

·
LBC SUCKS BUTT!!
Joined
·
849 Posts
Cool, looking to buy a Tarox BBK - let em know wheta the best prices you can give for 6 pots. Thanks.

Also, Awesome + Mini2 = Milltek GB :wink:
 

·
Registered
Joined
·
20 Posts
Discussion Starter #5
Hi Roofas

Thanks for the enquiry.

There are quite a few Tarox kits to choose from. 294mm 6 Pot Single Piece Discs £1062.68 inc vat & delivery. 318mm 6 Pot Two Piece Discs £1445.63 inc vat and delivery. 335mm 6 Pot Two Piece Discs £1594.56 inc vat and delivery.

They should be very good prices for you i hope.

If you can let me know what you are looking for with Milltek. Products, quantity etc? I'll get something put together for you.

Cheers John
 

·
LBC SUCKS BUTT!!
Joined
·
849 Posts
It's the one that fits over OEM 17's without the need for spacers. I am currently running AP's but my new wheels don't clear them so I need to swap BBK's.
 

·
Registered
Joined
·
298 Posts
good work getting involved with minis. had a service years back on my golf gti with you guys and was mighty impressed.
 

·
Registered
Joined
·
20 Posts
Discussion Starter #8
Thanks for the kind words Jay.

Roofas
With the Tarox kit for the Mini i have just spoken with them and the 294mm kit should be fine fir the standard wheels. If you wanted to go a little bigger with 2 piece discs they can put together a 310mm kit which is the same price i have listed for the 318mm kit.
 

·
Boosted
Joined
·
480 Posts
Hi John,

I'm interested in the Torque arm insert, how do we get the 10% discount on the price?
 

·
Registered
Joined
·
63 Posts
Hi John,

I would be interested in investigating fitting Koni FSD's with Eibach Pro Kit springs to an R56 JCW.

Have you done anything like that already?

Based on what I read for Mark V GTi's when I had one that combination should work well.
 

·
Registered
Joined
·
20 Posts
Discussion Starter #11
Hi Guys

Sorry for the late reply i've been away for just over a week.

I'll jump on these and get you some prices 1st thing tomorrow.

Cheers John
 

·
LBC SUCKS BUTT!!
Joined
·
849 Posts
Thanks for the prices John - I decided to go with the R56 Brembo kit but thanks for the help anyway.
 

·
Registered
Joined
·
20 Posts
Discussion Starter #13
Hi Benny

With any of the discounts i am offering please just give me a call and i will process the order and make sure you get the correct prices.

PW

With the R56 JCW and the Koni FSD's and Eibach Pro Kit they are available however they only list Cooper S not JCW. I have been led to believe that the kits fit but will only lower the car about 10 - 15mm. The retail is £709.99 all in delivered and i can do them for £628.65. You will be looking at 2 - 3 days for delivery.

The FSD and Eibach cobination does work on all the other vehicles i have been in but i have not tried them on the Mini's yet.

Cheers John
 

·
Registered
Joined
·
20 Posts
Discussion Starter #14
Oh and by the way our special offer for July will be with Koni. Not sure of the prices yet though. I will let you know when they are all sorted and they will be cheaper than just mentioned.
 

·
Registered
Joined
·
20 Posts
Discussion Starter #16
No we are not looking at doing the remaps at the moment. The tuning company we use specialises in VW, Audi, Seat and Skoda and although we do offer our own custom remaps i wouldn't want to try and offer you something that you could get better else where. Thanks for asking but i feel it best to be honest.
 

·
Registered
Joined
·
20 Posts
Discussion Starter #18
Yes we can do the servicing for you but we do not have any of the computor diagnostics equipment so we couldn't fault code read it or apply basic settings. I do feel that this is an important part of a service but not essential unless you have a running issue.

Thanks for your enquiry. John.
 
1 - 18 of 18 Posts
Top