Joined
·
26 Posts
wondering if anyone can help me? my rear tyres are run flats and my front ones are normal! the other day after my abs occasionally and runflat tyre warning comes on over bumps and speed acceleration i moticed the nearside rear was at 5 psi so i filled to 33 psi all round o/s runflat could not get gap off so couldnt inflate or check that one. ran it for two days fine then actually found out you run 2.1 bar or 30 psi so went to station today noticed n/s rear had only lost 4psi (not bad) so i ran 30 psi through all the tyres bar the one i cannot get the valve cover off and ever since any bump slight acceleration these lights come on and i know abs was done for last mot.....Any ideas folks
